4 Open the latch and disconnect the keyboard back-light cable from the system
board.
5 Open the latch and disconnect the touchpad cable from the system board.
6 Open the latch and disconnect the hard-drive cable from the system board.
7 Open the latch and disconnect the I/O board cable from the system board.
8 Open the latch and disconnect the nger-print reader cable from the system
board.
9 Open the latch and disconnect the power-button board cable from the system
board.
10 Remove the three screws (M2.5x5) that secure the right hinge to the system
board.
90
To Next Page
Loading...
