Adding and Replacing Parts 179
4
Release the FCM by pushing the metal securing brackets away from the
card until the card pops up slightly.
5
Remove the FCM.
Replacing the FCM
NOTICE: Install the FCM in the WWAN or WPAN slot. Do not install an FCM in the
WLAN card slot. Doing so may cause damage to your computer.
1
Insert the
FCM
connector into the system board connector at a 45-degree
angle
2
Press the other end of the
FCM
down into the securing tabs until the card
clicks into place.
1 metal securing tabs (2) 2 FCM
1
2
To Next Page
Loading...
