10. Follow the procedure in After working inside your computer.
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the M.2 2230 solid-state drive or M.2 2280 solid-state drive from M.2 slot one, whichever applicable
4. Remove the M.2 2230 solid-state drive from M.2 slot two.
5. Remove the wireless card.
6. Remove the battery.
7. Remove the left fan.
8. Remove the right fan.
9. Remove the heat sink.
10. Remove the system board.
NOTE: The system board can be removed with the heat sink, solid-state drives, and memory installed.
About this task
The following image(s) indicate the location of the speakers and provides a visual representation of the removal procedure.
Steps
1. Peel off the tapes that secure the speaker cable to the palm-rest and keyboard assembly.
2. Remove the speaker cables from the routing guides on the palm-rest and keyboard assembly.
3. Lift the speakers along with their cables off the palm-rest and keyboard assembly.
56
Removing and installing components
To Next Page
Loading...
