Replacing the Battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
NOTE: If replacing with a new battery, peel off the tape on the battery
base before proceeding to replace the battery.
1 Align the battery with the sponge on the display panel and place it firmly
down.
2 Connect the battery cable to the system board.
1 system board 2 battery cable
3 battery 4 sponge
26
To Next Page
Loading...
