Replacing the Antenna
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Adhere the antenna modules to the display bezel and secure the antenna
modules with the Aluminium foil tapes.
2 Route the antenna cables through the routing guides on the display
bezel.
3 Connect the flex cables to the display board.
4 Adhere the tape and Aluminium foil tape to the antenna cables and
camera and control-buttons board cable.
5 Connect the control-buttons board cable to the control-buttons board
and secure it with the tape.
Post-requisites
1 Follow the instructions from step 7 to step 15 in “Replacing the System
Board”.
2 Replace the wireless card.
3 Follow the instructions from step 2 to step 6 in “Replacing the Back
Cover”.
61
To Next Page
Loading...
