Removing the Control-
Buttons Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
Follow the instructions from step 1 to step 7 in “Removing the Back Cover”.
Procedure
1 Remove the screws that secure the control-buttons board to the back
cover.
2 Peel the tape that secures the control-buttons board cable to the
control-buttons board.
3 Disconnect the control-buttons board cable from the control-buttons
board.
28
To Next Page
Loading...
