2 Insert the memory module into the memory-module slot and press the
memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module
and reinstall it.
1 memory module 2 memory-module slot
3 tab 4 notch
3 Slide the drive cage into the chassis.
4 Align the screw holes on the drive cage with screw holes on the chassis.
5 Replace the screws that secure the drive cage to the chassis.
6 Connect the power cable and the data cable to the hard drive.
Post-requisites
1 Replace the heat-sink assembly.
2 Replace the front bezel.
3 Replace the computer cover.
40
To Next Page
Loading...
