Removing the optical drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the computer cover.
2 Remove the front bezel.
3 Remove the heat-sink assembly.
4 Remove the drive cage.
Procedure
1 Turn the drive cage over.
2 Remove the screws that secure the optical-drive assembly to the drive
cage.
54
To Next Page
Loading...
