Replacing the antenna
modules
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Adhere the antenna modules to the chassis.
2 Slide the antenna cables through the routing hole on the chassis.
Post-requisites
1 Replace the wireless card.
2 Replace the drive cage.
3 Replace the heat-sink assembly.
4 Replace the front bezel.
5 Replace the computer cover.
70
To Next Page
Loading...
