Removing the processor
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the computer cover.
2 Remove the front bezel.
3 Remove the heat-sink assembly.
Procedure
NOTE: To avoid damaging the processor, handle the processor only by
the edges.
1 Press the release lever down and then pull it outwards to release it from
the securing tab.
2 Extend the release lever completely to open the processor cover.
50
To Next Page
Loading...
