Replacing the optical drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Align the tabs on the optical-drive bezel with the slots on the optical
drive and snap the optical-drive bezel into place.
2 Slide the optical-drive assembly into the drive cage.
3 Replace the screws that secure the optical-drive assembly to the drive
cage.
Post-requisites
1 Replace the drive cage.
2 Replace the heat-sink assembly.
3 Replace the front bezel.
4 Replace the computer cover.
56
To Next Page
Loading...
