Procedure for removing drive cage with
3.5–inch hard drive
1 Disconnect the power cables and data cables from all the drives.
NOTE: The number and type of drives varies depending on the
configuration you ordered.
1 drive cage 2 hard-drive data cable
3 hard-drive power cable 4 optical-drive data cable
5 optical-drive power cable
2 Remove the screws that secure the drive cage to the chassis, then press
the tab and slide the drive cage outward.
3 Turn the drive cage at an angle to release the tab on the drive cage from
the slot on the chassis.
4 Lift the drive cage off the chassis.
47
To Next Page
Loading...
