Table 6. Security (continued)
Option Description
● Confirm new password:
Click OK once you set the password.
NOTE: For the first time login, "Enter the old password:" field is not shown. Hence, password
has to be set for the first time you login and then you can change or delete the password.
System Password
Enables you to set, change, or delete the System password.
The entries to set password are:
● Enter the old password:
● Create new password:
● Confirm new password:
Click OK once you set the password.
NOTE: For the first time login, "Enter the old password:" field is not shown. Hence, password
has to be set for the first time you login and then you can change or delete the password.
Password Change
Enables you to change the System password when the administrator password is set.
Default: Permitted
Absolute
Enable or disable the BIOS module interface of the optional Computrace Service from Absolute
Software.
Default: Enabled
Absolute status Displays the status of the Computrace Service from the Absolute Software.
Default: Deactivate
Firmware TPM Enables or disables the Trusted Platform Module (TPM) during POST.
Default: Enabled
PPI Bypass for Clear
Command
Enables you to control the TPM Physical Presence Interface (PPI). When enabled, this setting will
allow the OS to skip BIOS PPI user prompts when issuing the Clear command. Changes to this
setting take effect immediately.
Default: Disabled
UEFI Firmware Capsule
Updates
Enables you to update the system BIOS via UEFI capsule update packages.
Default: Enabled
WINDOWS SMM
SECURITY MITIGATIONS
T
Enables or disables additional WINDOWS SMM Security Mitigation protections.
Default: Disabled
Secure Boot
Secure Boot Enables or disables the computer to boos using only validated boot software.
Default: OFF.
Secure Boot Mode Selects the Secure Boot operation mode.
Default: Deployed Mode.
Expert Key Management Enables or disables the keys in the PK, KEK, db, and dbx security key databases to be modified.
Default: Disabled
68 System setup
To Next Page
Loading...
