14 | Removing the Fan Shroud
Removing the Fan Shroud
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
Remove the computer cover. See "Removing the Computer Cover" on page 12.
Procedure
1 Press in on the fan shroud and lift it to release the tabs that secure the fan shroud to
the processor fan and heat-sink assembly.
2 Lift the fan shroud and set it aside.
1 processor fan and heat-sink assembly 2 fan shroud
book.book Page 14 Monday, November 25, 2013 3:53 PM
To Next Page
Loading...
