Replacing the Processor | 43
5 When the processor is fully seated in the socket, close the processor cover.
6 Pivot the release lever.
Postrequisites
1 Replace the processor fan and heat sink. See "Replacing the Processor Fan and
Heat-sink Assembly" on page 40.
2 Replace the fan shroud. See "Replacing the Fan Shroud" on page 15.
3 Replace the computer cover. See "Replacing the Computer Cover" on page 13.
4 Follow the instructions in "After Working Inside Your Computer" on page 9.
1 alignment post 2 processor pin-1 corner
3 processor 4 processor cover
5 processor-cover notch 6 release lever
7 securing tab
book.book Page 43 Monday, November 25, 2013 3:53 PM
To Next Page
Loading...
