Replacing the Fan Shroud | 15
Replacing the Fan Shroud
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Place the fan shroud over the processor fan and heat-sink assembly.
2 Gently press the fan shroud until the tabs on the fan shroud snap into place.
Postrequisites
1 Replace the computer cover. See "Replacing the Computer Cover" on page 13.
2 Follow the instructions in "After Working Inside Your Computer" on page 9.
book.book Page 15 Monday, November 25, 2013 3:53 PM
To Next Page
Loading...
