Replacing the Front Bezel | 25
Replacing the Front Bezel
WARNING:
B
efore working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 9. For more safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align and insert the front bezel clamps into the front panel slots.
2 Rotate the front bezel towards the computer until the front bezel tabs snap
into
place.
Postrequisites
Replace the computer cover. See "Replacing the Computer Cover" on page 13.
book.book Page 25 Monday, November 25, 2013 3:53 PM
To Next Page
Loading...
