26 | Removing the Drive Cage
Removing the Drive Cage
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the computer cover. See "Removing the Computer Cover" on page 12.
2 Remove the fan shroud. See "Removing the Fan Shroud" on page 14.
3 Remove the front bezel. See "Removing the Front Bezel" on page 23. Place the
computer on its side with the computer cover facing up.
Procedure
1 Remove the screws that secure the drive cage to the chassis.
1 screw (3)
book.book Page 26 Monday, November 25, 2013 3:53 PM
To Next Page
Loading...
