About this task
The following image(s) indicate the location of the coin-cell battery and provides a visual representation of the installation procedure.
Steps
1. Insert the coin-cell battery into its slot on the system board with the positive side (+) label facing up.
2. Press down and and snap the coin-cell battery into the slot on the system board.
Next steps
1. Install the left-side cover.
2. Follow the procedure in After working inside your computer.
Wireless card
Removing the wireless card
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
About this task
The following image(s) indicate the location of the wireless card and provides a visual representation of the removal procedure.
Removing and installing components
19
To Next Page
Loading...
