Processor
Removing the processor
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
3. Remove the fan shroud.
4. Remove the fan and heat-sink assembly.
About this task
CAUTION: The processor may become hot during normal operation. Allow sufficient time for the heat sink to cool before
you touch it.
CAUTION: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your
skin can reduce the heat transfer capability of the thermal grease.
The following image(s) indicate the location of the processor and provides a visual representation of the removal procedure.
38 Removing and installing components
To Next Page
Loading...
