Media-card reader
Removing the media-card reader
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
3. Remove the front cover.
About this task
The following image(s) indicate the location of the media-card reader and provides a visual representation of the removal procedure.
Steps
1. Lay the computer with its right side facing down.
2. Remove the screw (6-32) that secures the media-card reader to the chassis.
3. Using the tip of a Phillips-head screw driver, push on the screw hole location to release the media-card reader.
4. Slide and lift the media-card reader from the slot on the chassis.
32
Removing and installing components
To Next Page
Loading...
