Replacing the palm-rest and keyboard
assembly
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working
inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
About this task
Place the palm-rest and keyboard assembly on a flat and clean surface.
Post-requisites
Steps
1. Replace the power button with fingerprint reader (optional).
2. Replace the system board.
45
106 Replacing the palm-rest and keyboard assembly
To Next Page
Loading...
