Replacing the display assembly
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working
inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
About this task
NOTE:
Ensure that the hinges are opened to the maximum before replacing the display assembly on palm-rest and
keyboard assembly.
Steps
1. Slide the palm-rest and keyboard assembly under the hinges on the display assembly
2. Place and align the palm-rest and keyboard assembly on the display assembly.
Replacing the power-adapter port
75
To Next Page
Loading...
