Procedure
About this task
NOTE:
The M.2 card slot on your computer may support the following configurations:
● M.2 2230 solid-state drive
● M.2 2280 solid-state drive
● M.2 2280 Intel Optane
NOTE: Depending on the configuration installed a thermal shield may be installed in your computer. If no thermal shield is
installed skip steps 4 and 5.
Steps
1. Align the notch on the solid-state drive/Intel Optane with the tab on the solid-state drive/Intel Optane slot.
2. Slide the solid-state drive/Intel Optane into the solid-state drive/Intel Optane slot.
3. Replace the screw (M2x3) that secures the solid-state drive/Intel Optane to the palm-rest and keyboard assembly
Replacing the solid-state drive/Intel Optane
49
To Next Page
Loading...
