Removing the optical drive
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working
inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
About this task
Steps
1. Remove the screw (M2x3) that secures the optical-drive assembly to the palm-rest and keyboard assembly.
2. Using a screwdriver, carefully push the optical-drive assembly through the slot to release the optical-drive assembly out of
the optical-drive bay.
3. Slide the optical-drive assembly out of the optical-drive bay.
4. Remove the two screws (M2x3) that secure the optical-drive bracket to the optical drive.
5. Remove the optical-drive bracket from optical drive.
6
Removing the optical drive 17
To Next Page
Loading...
