Identifier GUID-1FB16E7C-AF0C-4FA0-8736-EAD91D8969A8
Status Released
Removing the camera
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-4EAC6CFA-EE1F-4B35-9585-4BC186B53E54
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the wireless card.
3 Remove the display assembly.
4 Remove the display bezel.
Identifier GUID-30964F39-14DD-44E2-962E-1F4D295E21D0
Status Released
Procedure
1 Gently pry the camera o the display back-cover and antenna assembly.
2 Release the camera cable from the routing guides on the display back-cover and antenna assembly.
3 Peel the tape securing the camera cable to the camera module.
4 Disconnect the camera cable from the camera module.
44
108 Removing the camera