Identifier GUID-6C4E9746-B780-409D-B703-9A43273C227D
Status Released
Removing the display hinges
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-9A64DA8B-53A3-487C-8611-FA0887B851C1
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the wireless card.
3 Remove the display assembly.
4 Remove the display bezel.
5 Remove the display panel.
Identifier GUID-9A5B3FF3-215C-435B-9008-4F112B215C8B
Status Released
Procedure
1 Remove the eight screws (M2x2) that secure the display-hinge brackets to the display back-cover and antenna assembly.
2 Lift the display hinges and brackets o the display back-cover and antenna assembly.
48
Removing the display hinges 117
To Next Page
Loading...
