Identifier GUID-A99140DB-7AF3-4218-B305-532FF94DF51D
Status Released
Replacing the power-adapter port
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-B822CBE0-1A9A-4B73-874C-2E6026C528E0
Status Released
Procedure
1 Align the screw hole on the power-adapter port with the screw hole on the palm-rest and keyboard assembly.
2 Replace the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly.
3 Connect the power-adapter port cable to the system board.
4 Close the right hinge.
27
66 Replacing the power-adapter port
To Next Page
Loading...
