Dell Inspiron 7386 - Removing the Display Hinges; Display Hinges Removal Prerequisites

Removing the display hinges
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1. Remove the base cover.
2. Remove the wireless card.
3. Remove the fan.
4. Remove the heat sink.
5. Remove the display assembly.
6. Remove the display panel.
Procedure
1. Remove the six screws (M2.5x2.5) that secure the hinges to the display back cover.
2. Lift the hinges and brackets off the display back cover.
42
76 Removing the display hinges