Dell Inspiron 7386 - Replacing the Display Cable; Display Cable Replacement Post-requisites

Replacing the display cable
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1. Adhere the camera cable to the display panel.
2. Connect the display cable and close the latch to secure the cable.
3. Connect the sensor-board cable and close the latch to secure the cable.
4. Connect the touchscreen-board cable and close the latch to secure the cable.
5. Adhere the tapes that secure the cables to the display panel.
Post-requisites
1. Replace the camera.
2. Follow the procedure from step 4 to step 14 in "Replacing the display panel".
3. Replace the display assembly.
4. Replace the heat sink.
5. Replace the fan.
6. Replace the wireless card.
7. Replace the base cover.
45
Replacing the display cable 79