Replacing the display back-cover
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
Place the display back cover on a flat surface.
Post-requisites
1. Replace the display hinges.
2. Replace the display panel.
3. Replace the display assembly.
4. Replace the heat sink.
5. Replace the fan.
6. Replace the wireless card.
7. Replace the base cover.
47
Replacing the display back-cover 81