3. Reinstall the M2.5 x 4-mm screw that secures the flex-cable mounting bracket
to the top cover.
4. Starting on the left side, use a magnetic screwdriver to reinstall the six M2 x 3-
mm screws that secure the display panel in the top cover.
5. Reinstall the display assembly bezel.
Display Latch Assembly
1. Remove the
hinge cover.
2. Remove the screw securing the flex cable to its strain relief, and then use the
pull loop to remove the flex cable from the video card.
file:///F|/Service%20Manuals/Dell/Inspiron/8100/remove.htm (28 of 56) [2/28/2004 7:37:23 AM]
To Next Page
Loading...
