NOTICE: When reconnecting the flex cable, press down on both ends of the
connector, not in the middle. Pressing the middle of the connector can damage
fragile components.
3. Remove the
display assembly bezel.
4. Remove the display panel from the top cover.
5. Remove the display latch by unsnapping the latch and captive spring.
NOTICE: When replacing the display assembly latch, it may help to flex the
cover slightly to allow more space while seating the latch.
Microprocessor Thermal Cooling Assembly
file:///F|/Service%20Manuals/Dell/Inspiron/8100/remove.htm (29 of 56) [2/28/2004 7:37:23 AM]
To Next Page
Loading...
