10. Remove the reserve battery:
a. Pry the reserve battery free from the metal palm rest bracket.
b. Remove the foam-pad remnants from the palm rest bracket.
Replacing the Reserve Battery
1. Seat the reserve battery and press it into place.
2. Connect the reserve battery cable.
3. Place the palm rest bracket loosely in the palm rest, and connect the palm rest
flex cable to the ZIF connector.
4. Replace the two M2.5 x 4-mm screws that secure the palm rest bracket to the
palm rest.
System Board Assembly
file:///F|/Service%20Manuals/Dell/Inspiron/8100/remove.htm (44 of 56) [2/28/2004 7:37:23 AM]
To Next Page
Loading...
