Dell Inspiron 8100 - Ports and Connectors

System Specifications : Dell Inspiron 8100
Graphics bus width 32-bit AGP 4X cable bus
PC Card
CardBus controller Texas Instruments PCI
4450/4451 CardBus
controller
PC Card connectors two (supports two Type I or
Type II cards or one
Type III card)
Cards supported 3.3 V and 5 V
PC Card connector size 68 pins
Data width (maximum) PCMCIA 16 bits
CardBus 32 bits
Memory
Architecture SDRAM
Memory module connector two user-accessible
SODIMM sockets
Memory module capacities 64-, 128-, and 256-MB
3.3-V SDRAM SODIMMS
Standard memory 64 MB (non-ECC)
Maximum memory 512 MB (non-ECC)
Memory clock speed 133 MHz
Memory access time CL2 or CL3 (NOTE: CL2 and
CL3 indicate a CAS latency
of two and three clocks,
respectively.)
Ports and Connectors
file:///F|/Service%20Manuals/Dell/Inspiron/8100/specs.htm (2 of 9) [2/28/2004 7:37:14 AM]