Dell Inspiron 8100 - Removing the Battery Charger Board

Removing and Replacing Parts : Dell Inspiron 8100
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface on the computer.
Removing the Battery Charger Board
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the
keyboard assembly.
3. Remove the
hinge cover.
4. Remove the
display assembly.
5. Remove the
palm rest assembly.
6. Lift out the video card.
7. Lift the battery charger board out of the system board connector.
file:///F|/Service%20Manuals/Dell/Inspiron/8100/remove.htm (50 of 56) [2/28/2004 7:37:23 AM]