1. If the computer is connected (docked) to an advanced port replicator (APR),
undock it.
2. Keep the display open, and tilt the computer back so that you can access the
bottom of the computer.
3. Slide and hold the latch release on the left side, and remove any device installed
in the media bay.
4. Slide and hold the latch release on the right side, and remove any battery
installed in the battery bay.
5. Locate the indentation under each palm rest, place your thumbs on the
indentation, and gently push to release the palm rests.
file:///F|/Service%20Manuals/Dell/Inspiron/8100/remove.htm (38 of 56) [2/28/2004 7:37:23 AM]
To Next Page
Loading...
