Dell Latitude 3390 2-in-1 - Display Cover

4 Turn the computer over and open the display.
5 To remove display assembly:
a Remove the screws that secure the display assembly to the laptop chassis [1].
b Lift the display assembly away from the laptop chassis [2].
Installing the display assembly
1 Align the display assembly with the screw holders on the laptop chassis.
2 Tighten the screw to secure the display assembly to the laptop chassis.
3 Close the display and turn the laptop over.
4 Connect the display and touch screen board cables to the connectors on the system board.
5 Ax the adhesive tapes to secure the display and touch screen board cables.
6 Install the:
a WLAN card
b battery
c base cover
7 Follow the procedure in After working inside your computer.
Display cover
Removing the display cover
1 Follow the procedure in Before working inside your computer.
2 Remove the:
30
Removing and installing components