Dell Latitude 3390 2-in-1 - Power Connector Port

Power connector port
Removing the power connector port
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
3 To remove the power connector port:
a Disconnect the power connector port cable from the connector on the system board [1].
b Remove the screw (1) that secures the power connector port to the laptop [2].
c Lift the power connector port away from the laptop [3].
Installing the power connector port
1 Insert the power connector port into the slot on the laptop.
2 Tighten the screw to secure the power connector port to the laptop.
Removing and installing components
37