Dell Latitude 3390 2-in-1 - Display (eDP) Cable

Display (eDP) cable
Removing the display cable
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c display assembly
d display cover
3 To remove the display cable:
a Peel the adhesive tapes [1] [2].
b Disconnect the sensor board cable from the display panel [3].
c Open the latch and disconnect the display cable from the display panel [4].
d Lift the display cable away from the display panel [5].
e Release the display cable from the routing channels [6].
32 Removing and installing components