Dell Latitude 3390 2-in-1 - Camera

Installing the display cable
1 Route the display cable through the placeholders on the display panel.
2 Align the display cable along the routing channels on the display panel.
3 Connect the display cable and sensor board cable to the connectors on the display panel.
4 Ax the adhesive tapes to secure the display cable and sensor board cable.
5 Install the:
a display cover
b display assembly
c battery
d base cover
6 Follow the procedure in After working inside your computer.
Camera
Removing the camera
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c display assembly
d display cover
3 To remove the camera:
a Using a plastic scribe, release the camera module from the display panel [1] [2].
b Disconnect the camera cable from the camera module [3].
Removing and installing components
33