System fan
Removing the system fan
Steps
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
3. To remove the system fan:
a. Disconnect the system fan cable from the connector on the system board [1].
b. Remove the M2x3 screws (2) that secure the system fan to the laptop [2].
c. Lift the system fan away from the laptop [3].
Installing the system fan
Steps
1. Place the system fan on the laptop.
2. Tighten the M2x3 screws (2) to secure the system fan to the laptop.
3. Connect the system fan cable to the connector on the system board.
4. Install the:
a. battery
22
Removing and installing components
To Next Page
Loading...
