Dell Latitude 3440 - Display Back Cover; Removing the Display Back Cover

Steps
1. Connect the eDP cable to the connector on the camera module.
2. Adhere the eDP cable to the display back cover.
3. Adhere the conductive tape and route the eDP cable to the display back cover.
Next steps
1. Install the camera.
2. Install the display panel.
3. Install the display bezel.
4. Install the display assembly.
5. Install the base cover.
6. Follow the procedure in After working inside your computer.
Display back cover
Removing the display back cover
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the display assembly.
4. Remove the display bezel.
5. Remove the display panel.
6. Remove the camera.
7. Remove the eDP cable.
Removing and installing components
71