General screen options
This section lists the primary hardware features of your computer.
Option Description
System
Information
• System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership
Tag, Ownership Date, Manufacture Date, and the Express Service Code.
• Memory Information: Displays Memory Installed, Memory Available, Memory
Speed, Memory Channels Mode, Memory Technology, DIMM A Size, DIMM B
Size.
• Processor Information: Displays Processor Type, Core Count, Processor ID,
Current Clock Speed, Minimum Clock Speed, Maximum Clock Speed,
Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit technology.
• Device Information: Displays Primary Hard Drive, SATA-0, M.2PCIe SSD-0, Dock
eSATA Device, LOM MAC Address, Video Controller, Video BIOS Version, Video
Memory, Panel Type, Native Resolution, Audio Controller, WiFi Device, WiGig
Device, Cellular Device, Bluetooth Device.
Battery
Information
Displays the battery status and the type of AC adapter connected to the computer.
Boot Sequence
Boot Sequence Allows you to change the order in which the computer
attempts to find an operating system. The options are:
• Windows Boot Manager
• UEFI: Hard drive details
Boot List Options Allows you to change the boot list option:
• Legacy
• UEFI (enabled by default)
Advanced Boot
Options
This option allows you the legacy option ROMs to load. By default, the Enable
Legacy Option ROMs is disabled.
Date/Time Allows you to change the date and time.
System Configuration screen options
Option Description
Integrated NIC Allows you to configure the integrated network controller. The options are:
• Disabled
• Enabled
• Enabled w/PXE: This option is enabled by default.
SATA Operation Allows you to configure the internal SATA hard-drive controller. The options are:
31
To Next Page
Loading...
