Option Description
NOTE: If Strong Password is enabled, Admin and System passwords must
contain at least one uppercase character, one lowercase character and be at
least 8 characters long.
Password
Configuration
Allows you to determine the minimum and maximum length of Administrator and
System passwords.
Password Bypass Allows you to enable or disable the permission to bypass the System and the
Internal HDD password, when they are set. The options are:
• Disabled
• Reboot bypass
Default setting: Disabled
Password Change Allows you to enable the disable permission to the System and Hard Drive
passwords when the admin password is set.
Default setting: Allow Non-Admin Password Changes is selected.
Non-Admin Setup
Changes
Allows you to determine whether changes to the setup options are allowed when
an Administrator Password is set. If disabled the setup options are locked by the
admin password.
TPM Security Allows you to enable the Trusted Platform Module (TPM) during POST. The options
are:
• TPM Security
• Clear
• TPM ACPI Support
• TPM PPI Provision Override
• TPM PPI Deprovision Override
• Deactivate
• Activate
NOTE: The TPM version 1.2 is supported for all Windows operating system.
NOTE: The TPM version 1.2 is for only for Windows 7/8.1 operating system.
The TPM version 1.2/2.0 is for Windows 10 operating system. You can
upgrade/downgrade for Windows 10 operating system.
CAUTION: For the TPM upgrade/downgrade process, it is recommended to
complete the process in an AC power with AC adapter plugged into the
computer. The upgrade/downgrade process without the AC adapter
plugged in might damage the computer or hard disk.
NOTE: It is recommended to use the Dell AC adapter that is shipped with the
computer.
Computrace Allows you to activate or disable the optional Computrace software The options
are:
34
To Next Page
Loading...
