Installing the SD Card
1. Push the memory card into the compartment until it clicks into place.
2. Follow the procedures in
After Working Inside Your Computer
.
Removing the Battery
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Slide the release latches outwards to unlock the battery and lift the battery to remove it from the computer.
Installing the Battery
1. Slide the battery into its slot until it clicks into place.
2. Follow the procedures in
After Working Inside Your Computer
.
Removing the Access Panel
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the battery.
11
To Next Page
Loading...
