Dell Latitude 3580 - Base Cover; Removing the Base Cover

Table 1. Latitude 3580 screw list (continued)
Component Screw type Quantity Image
I/O board M2.5x5 2
DC-in port M2.5x5 3
Fingerprint reader M2x3 1
Touchpad M2x3 4
Display assembly M2x3
M1.6x2
1
3
LCD panel M1.6x2 6
LCD Hinge M1.6x2
M2.5x3
2
4
System board M2x3 3
Base Cover
Removing the base cover
Steps
1. Follow the procedure in Before working inside your computer
2. To remove the base cover:
a. Loosen the M2.5xL8.5 captive screws that secure the base cover to the computer [1].
b. Pry the base cover from the edge [2].
NOTE: You may need a plastic scribe to pry the base cover from the edge [2].
10 Removing and installing components