Installing the battery
Steps
1. Insert the battery into the slot on the computer.
2. Connect the battery cable to the connector on the battery.
3. Tighten the M2.0xL3 screws to secure the battery to the computer.
4. Install the:
a. base cover
5. Follow the procedure in After working inside your computer.
Keyboard
Removing the keyboard
Steps
1. Follow the procedure in Before working inside your computer
2. Remove the:
a. base cover
b. battery
3. Gently pry out the keyboard using a plastic scribe.
Removing and installing components
13
To Next Page
Loading...
