Table 10. System Configuration (continued)
Option Description
Touchscreen
This option controls whether the touchscreen is enabled or
disabled
This option is enabled by default.
Unobtrusive Mode
When enabled, pressing Fn+F7 will turn off all light and
sound emission in the system. Press Fn+F7 to resume normal
operation.
Default is Disabled.
Fingerprint Reader
Enable or disable the Fingerprint Reader or the Fingerprint
Reader Device's Single Sign On capability.
● Enable Fingerprint Reader Device: Enabled by Default
● ENable Fingerprint Reader Single Sign On: Enabled by
Default
Miscellaneous devices
Allows you to enable or disable various on board devices.
● Enable Camera—Default
● Enable Secure Digital (SD) Card
● Secure Digital (SD) Card Boot - Disabled
● Secure Digital Card (SD) Read-Only Mode - Disabled
Video screen options
Table 11. Video
Option Description
LCD Brightness
Allows you to set the display brightness depending upon the
power source. On Battery(50% is default) and On AC (100 %
default).
Dynamic Backlight Control
This option Enables or Disables the Dynamic Backlight Control
if the Panel supports this feature.
Security
Table 12. Security
Option Description
Admin Password
Allows you to set, change, or delete the administrator(admin) password.
The entries to set password are:
● Enter the old password:
● Enter the new password:
● Confirm new password:
Click OK once you set the password.
NOTE: For the first time login, "Enter the old password:" field is marked to "Not set". Hence,
password has to be set for the first time you login and then you can change or delete the
password.
System Password
Allows you to set, change, or delete the System password.
The entries to set password are:
100 System setup
To Next Page
Loading...
