Dell Latitude 7400 2-in-1 - Speakers; Removing the Speakers

Next steps
1. Connect the battery cable
2. Install the base cover.
3. Install the SD memory card.
4. Follow the procedure in after working inside your computer.
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the SD memory card.
3. Remove the base cover.
4. Disconnect the battery cable.
Steps
1. Disconnect the speaker cable [1] from the connector from the system board and peel off the speaker flex cable [2] from the
battery.
2. Remove the three (M1.6x1.4) screws [1] that secure the speakers to the system board and lift the speakers off the computer
[2].
52
Removing and installing components